Printer friendly version of this page. Find a Distributor near you.
PTQ-Serial Picture

Liquid and Gas Flow Computer for Quantum

PTQ-AFC

Прекращено: продукт больше не поставляется. More Info

The ProTalk Liquid & Gas Flow Computer Module is a backplane compatible module that allows Quantum processors to easily support flow applications performing measurement of hydrocarbon gases or liquids using AGA 3, 7, 8 and API 2540 measurement standards.

The module calculates flow rates, accumulated volumes, accumulated mass and accumulated energy (heating value). The calculation results are transferred back to the Processor memory for use in the application ladder program or for transfer back to a SCADA host.

The PTQ-AFC Flow Computer product has been approved by Industry Canada - Measurement for complying with Provisional Specifications and Procedures for the approval of Correction Devices and Linearization Functions Incorporated in Meters and Flow Computers

Интеграция платформы

Click on image(s) to enlarge
Drag with the mouse. Click for close.

Особенности и преимущества

The PTQ-AFC is an in-rack Liquid & Gas Flow Computer Module for the Quantum platform. The PTQ-AFC Flow computer module supports 16 meter channels for the measurement of hydrocarbon gases and liquids using currently accepted industry measurement standards.The module calculates flow rates, accumulated volumes, accumulated mass and accumulated energy (heating value). The calculation results are transferred back to the Processor memory for use in the application ladder program or for transfer back to a SCADA host.

Certified for Custody Transfer

  • Gas measurement is accurate to the degree that it is Industry Canada Certified for custody transfer
  • Assurance to users the flow computer's values can be used in the transfer of ownership applications

Licensed Backplane Technology

  • Manufactured under license from Schneider Electric
  • High-speed data transfer between PTQ module and Quantum processor

Automatic Flow Computer

  • 16 meter runs with four streams per run
  • Monitor each meter run (flow rates, accumulator values and other calculation results). All alarm data is displayed on the screen
  • Download and view the archives and events
  • Audit scan shows the process input variables and calculation results as "snapshots," allowing verification of the calculations
  • Access Modbus Slave data (130,000 registers) and Virtual Modbus Slave data (20,000 registers)
  • Remap Modbus data to optimize the data polling

Includes AFC Manager Configuration Software

  • Configure, monitor, archive and view status from your desktop PC
  • Modbus Master port can send Modbus commands to connected devices
  • Precise configuration of meter types, streams, fluids and gases, component analysis

Backed by ProSoft Technology

  • 20-year history of delivering high-quality, reliable solutions designed with you in mind
  • Free, unlimited, worldwide Technical Support by phone anytime for pre-sale, set-up, or troubleshooting support help you get going sooner and stay running longer
  • Three-Year Warranty ensures reliability and protects against equipment failures

AFC Version 2.05 Update Notice

If your module measures liquids, please read this notice before upgrading from version 2.04 (or earlier) to 2.05 (or later).For compliance with new measurement standards, the AFC version 2.05 has introduced several new liquid product groups. In particular, the two non-refined liquid product groups of version 2.04, which covered the entire density range of crudes and NGLs, have each been split into two separate product groups, one for the higher density range of crudes and the other for the lower density range of NGLs. If your module has meter channels configured for either "Crude, NGL" or "Oil-water emulsion", you should decide before upgrading the firmware the new product group (light or heavy) to which each such channel should be assigned. This assignment will be performed during the upgrade process and will preserve all other configuration and historical records including accumulator values and archives, in contrast to changing a product group after the upgrade which resets the meter configuration and erases all historical records. Meter channels configured for "Gas" or "Refined products" are not affected.AFC Manager exhibits the same behavior when converting a project between versions 2.04 (or earlier) and 2.05 (or later).The criterion for assigning the new product group depends on the density units and the Default Reference Density, as detailed in the following tables:Density Units = kg/m3

Version 2.04 Product Group

Default Reference Density

Version 2.05 Product Group

Crude, NGL

= 0 OR >= 610.0

Crude oils, JP4

Crude, NGL

> 0 AND < 610.0

NGLs, LPGs

Oil Water Emulsion

= 0 OR >= 610.0

Oil-water emulsion (Crd)

Oil Water Emulsion

> 0 AND < 610.0

Oil-water emulsion (NGL)

Density Units = Rd/60

Version 2.04 Product Group

Default Reference Density

Version 2.05 Product Group

Crude, NGL

= 0 OR >= 0.6100

Crude oils, JP4

Crude, NGL

> 0 AND < 0.6100

NGLs, LPGs

Oil Water Emulsion

= 0 OR >= 0.6100

Oil-water emulsion (Crd)

Oil Water Emulsion

> 0 AND < 0.6100

Oil-water emulsion (NGL)

Due to roundoff error of numeric conversions, a Relative Density very close to the cutoff value of 0.6100 may cause the module to assign the new product group opposite to the one that was intended. Before upgrading, change the Default Reference Density to a number significantly different from 0.6100, such as 0.6110 (to target Crude) or 0.6090 (to target NGLs). You may change it back to the correct value after the upgradeDensity Units = API Gravity

Version 2.04 Product Group

Default Reference Density

Version 2.05 Product Group

Crude, NGL

= 0 OR <= 100.0

Crude oils, JP4

Crude, NGL

> 0 AND > 100.0

NGLs, LPGs

Oil Water Emulsion

= 0 OR <= 100.0

Oil-water emulsion (Crd)

Oil Water Emulsion

> 0 AND > 100.0

Oil-water emulsion (NGL)

Applications

The PTQ-AFC module is the ideal solution for the many applications where hydrocarbon flow and SCADA communication must be added to the Quantum platform.

Applications using the PTQ-AFC module can be found mainly in the oil and gas industrial sectors.

Характеристики

  •  Single Slot - Quantum backplane compatible
  •  The module is recognized as an Options module and has access to PLC memory for data transfer
  •  Configuration data is stored in non-volatile memory in the ProTalk® module
  •  Up to six modules can be placed in a rack
  •  Local rack - The module must be placed in the same rack as processor
  •  Compatible with common Quantum programming tools: UnityPro XL, Concept, ProWORX
  •  Quantum data types supported: 3x, 4x
  •  High speed data transfer across backplane provides quick data update times

Характеристики оборудования

 Specification

 Value

 Backplane Current Load

 5 VDC ± 5%
1100 mA, maximum

 Operating Temperature

 32° F to 140° F (0° C to 60° C)

 Storage Temperature

-40° F to 185° F (-40° C to 85° C)

 Relative Humidity

 5% to 95% (without condensation)

 Vibration

 Sine vibration 4 to 100 Hz in each of the 3 orthogonal axes

 Shock

 30 g, 11 ms in each of the 3 orthogonal axes

 LED Indicators

 Module Status
 Backplane Transfer Status
 Serial Port Activity
 Serial Port Error Status

 Configuration Serial Port (PRT1)

 DB-9M PC Compatible
RS-232 only
No hardware handshaking

 Application Serial Ports

DB-9M PC Compatible
RS-232/422/485 jumper selectable
RS-422/485 screw termination included
RS-232 handshaking configurable
500 V Optical isolation from backplane

Загрузки

PTQ-AFC Datasheet 101,71 kB Последнее изменение 06.03.12
PTQ AFC User Manual 5,18 MB Последнее изменение 06.03.12
PTQ AFC App Reference Guide 3,27 MB Последнее изменение 27.04.10
PTQ-AFC Sample Ladder 714,33 kB Последнее изменение 31.03.10
AFC_Manager_User_Manual 7,72 MB Последнее изменение 17.10.12
AFC Technical Note 195,77 kB Последнее изменение 17.10.12
AFC-EUB_Dir017 51,79 kB Последнее изменение 17.10.12
Approval Notice_PTQ-AFC 4,56 MB Последнее изменение 17.10.12
EAFC Manager v4.04 3,37 MB Последнее изменение 12.11.18
MDC Help File 128,34 kB Последнее изменение 10.05.10
MDC File 2.60 10,61 kB Последнее изменение 10.05.10
PROFIBUS comDTM Software 7,94 MB Последнее изменение 24.03.17
Improving Flow Measurement Using PLC Based Flow Computing 258,58 kB Последнее изменение 17.12.14

одобрения и сертификаты

Ex Certificate (ATEX Directive) 106,86 kB Последнее изменение 11.11.13
CB Safety 39,05 kB Последнее изменение 08.10.12
Declaration of Conformity (RoHS/CE) 301,79 kB Последнее изменение 04.03.18
Russian GOST-R 7,07 MB Последнее изменение 30.11.12
GOST-R Declaration of Conformity 6,68 MB Последнее изменение 30.11.12
UL/cUL; Class 1, Div 2 1,18 MB Последнее изменение 10.09.14
UL/cUL; Class 1, Div 2 (Canada) 1,21 MB Последнее изменение 10.09.14