Remote I/O Scanner Features:

This mode allows users to replace their existing Remote I/O PLC with a ControlLogix or CompactLogix PAC without having to replace existing racks of I/O.

• Build new controller program without interrupting existing controls, minimizing downtime
• Supports up to 32 racks of Remote I/O
• Supports all Remote I/O baud rates (57.6, 115.2, and 230.4 K baud), and Remote I/O addressing 0 to 76 octal
• Works with both ControlLogix or CompactLogix
• Auto-Configuration utility discovers baud rate and maps discrete I/O reducing configuration errors

Drive:

This mode supports upgrading legacy Allen Bradley drives on Remote I/O to new EtherNet/IP enabled drives.

• No changes to PLC code required
• Supports up to 4 EtherNet/IP drives
• Configurable with 1/4, 1/2 and full rack addressing
• Supports all PowerFlex drives on EtherNet/IP

HMI

This mode allows legacy PanelViews on Remote I/O or DH+ to be upgraded to a PanelView Plus, PanelView Plus 6 or PanelView Plus 7 on EtherNet/IP.

• No changes to PLC code required
• Supports up to 8 PanelViews on the same network
• Support for DH+ to EtherNet/IP PanelViews upgrades on PLC5 or SLC networks

DH+

This operating mode acts as a bridge between an EtherNet/IP and a Data Highway Plus network.

• Programming terminals, and/or processors on an EtherNet/IP network can access legacy processors on a DH+ network
• Download to a PLC5 or SLC through RSLinx
• Configures through web browser
• Supports all DH+ baud rates (57.6, 115.2, and 230.4 K baud)
• Communication must be initiated from the EtherNet/IP side, DH+ Messages cannot be sent to EtherNet/IP devices
• Support for DH+ to EtherNet/IP PanelViews upgrades on PLC5 or SLC networks

Flex I/O Scanner

This mode allows PLC's on Remote I/O to connect to and control 1794-AENT EtherNet/IP Flex adapters.

• Designed to replace obsolete 1794-ASB adapters
• Supports up to 16 EtherNet/IP connections
• Each adapter and rack of discrete count as a single connection. Each analog module counts as a single connection

Specification

Description

Ports

1 RJ45 10/100 Mbps Ethernet port
1 Phoenix 3-pin power connector
1 Phoenix 3-pin network connector

Typical Power Consumption

200 mA @ 12 Vdc or 100 mA @ 24 Vdc

Maximum Power Dissapation

2.4W

Operating Temp

32°F to 122°F  (0 ºC  to 50 ºC)

Storage Temperature

-40°F to 185°F  (-40 ºC  to 85 ºC)

Dimensions

107 mm x 126 mm x 34 mm 
 (4.18 in x 4.97 in x 1.33 in)
  not including connectors

Humidity

5% to 95% RH, with no condensation