Our Commitment to You During COVID-19 Click here
ILX56-PBM Product Photo - ControlLogix PROFIBUS Master Module

PROFIBUS DPV1 Master/Slave for ControlLogix®

ILX56-PBM

The ILX56-PBM PROFIBUS DPV1 Master/Multi-Slave module allows Rockwell Automation® ControlLogix® processors to communicate with various PLCs and devices using the PROFIBUS DP protocol.  As a PROFIBUS DP Master, the module can transfer up to 5000 bytes of cyclic I/O data with various slave devices on the network. 

Or you can use the module as a PROFIBUS DP multi-slave, where the module can emulate up to 10 individual nodes on a PROFIBUS DP network, allowing for more cyclic I/O data transfer. 

With the ILX56-PBM module, ControlLogix® processors can easily communicate with devices supporting PROFIBUS DPV0 and DPV1 protocol. And through premier integration tools such as a custom Add-On Profile, project-specific Add-On Routines, and advanced tools such as PROFIBUS DP packet capture utility, you can minimize the time required to get a PROFIBUS DP network configured in a ControlLogix® environment.

In addition, with the use of multiple I/O connections back to the ControlLogix® processor, this module provides data update rates that will meet even the most demanding applications.   

Click here to download the AOP Files.

Интеграция платформы

Click on image(s) to enlarge
Drag with the mouse. Click for close.
Drag with the mouse. Click for close.

Особенности и преимущества

  • AOP and AOI: Module communication is integrated within Studio/RSLogix™ 5000 using a sample Add-On Instruction (AOI), and custom configuration utility created Add-On Routines to reduce commissioning time.
  • Autoscan: The Autoscan feature reduces startup times and simplifies troubleshooting by scanning the PROFIBUS network and uploading slave device addresses and configuration information. (Reads and maps nodes automatically to the module.)
  • ComDTM: Allows remote Ethernet connectivity with Asset Management Software, significantly lowering maintenance costs. You can configure, commission, maintain and diagnose your fieldbus devices throughout their entire lifecycle with this comprehensive, fully integrated engineering and maintenance environment.
  •  SD card slot (SD card optional) is used for storing configuration files in the event of a disaster.

Характеристики

PROFIBUS DP Master Specifications

Specification

Description

Slaves

Maximum 125

Input/Output

Maximum 244 Bytes per Slave

Input Data

Maximum 5000 Bytes

Acyclic Data

DPV1

Status data

88 Bytes

Output data

Maximum 5000 Bytes

DPV1 Services

Class 1 Read/Write
 Class 1 Alarm
 Class 2 Initiate/Read/Write/Abort

Services

Global-Control, Slave-Diagnostic, Set-Parameter

Sync, Freeze Command

Supported

Baud rate

9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud 1.5 MBaud, 3 MBaud, 6 MBaud, 12 MBaud

 

 

PROFIBUS DP Slave Specifications

Specification

Description

Slaves

Emulate up to 10 slaves

Input/Output

Maximum 244 Bytes per Slave

Input Data

Maximum 2440 Bytes

Acyclic Data

DPV1

Status data

88 Bytes

Output data

Maximum 2440 Bytes

DPV1 Services

Class 1 Read/Write, Class 1 Alarm            

Services

Global-Control, Slave-Diagnostic, Set-Parameter

Sync, Freeze Command

Supported

Baud rate

9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud 1.5 MBaud, 3 MBaud, 6 MBaud, 12 MBaud. Auto-detection mode is supported

Характеристики оборудования

 

Specification

Description

PROFIBUS Interface

RS-485, Max. 12 Mbps, potential free, according EN 50170

Power Supply

450 mA @ 5Vdc, 2 mA @ 24 Vdc

Dimensions

Standard 1756 Single-slot module

Burst

EN 61000-4-4, 2 kV, 5 kHz

Surge

EN 61000-4-5, 2 kV common mode, 1 kV differential mode

ESD

EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect

Radiated/Conducted Immunity

EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1 kHz sine wave
 EN 61000-4-6, 10 V, 0,15...80 MHz

Radiated/Conducted Emission

EN 55011 Class A

Vibration/Shock (operating)

IEC 600068-2-6, 10-500 Hz, ± 0,75 mm, ± 2 g, 1 Octave/min IEC 600068-2-27, 30 g, 11 ms

Operating Temperature

0°C  to 60°C (32°F to 140°F)

Relative Humidity

5 to 95% (non-condensing)

PROFIBUS Conformance

Certified (pending)

одобрения и сертификаты

Ex Certificate (ATEX Directive) 85,39 kB Последнее изменение 03.04.20
CB Safety 335,02 kB Последнее изменение 03.04.20
Declaration of Conformity (RoHS/CE) 539,05 kB Последнее изменение 03.04.20
UL/cUL; Class 1, Div. 2 84,59 kB Последнее изменение 03.04.20