RLX2-IHG Product Photo

802.11g High Power Industrial Hotspot RLX2 (FCC)

RLX2-IHG-A

Прекращено: продукт больше не поставляется. More Info
Recommended replacements: RLX2-IHNF-E

The ProSoft Technology 802.11g High Power Industrial Hotspot™ (RLX2-IHG) is a high-speed wireless Ethernet radio for applications up to 10 mi. / 16 km. The RLX2-IHG uses the 2.4 GHz band and supports a data rate up to 54Mbps. The Hotspot supports Access Point, Repeater, Bridging, and Client modes. The RLX2-IHG offers fast roaming, hazardous location certifications, as well as vibration and shock resistance.

The included IH Browser configuration and monitoring software allows the user to view network topology, assign IP addresses, monitor network diagnostics, and update radio firmware.

Интеграция платформы

Click on image(s) to enlarge
Drag with the mouse. Click for close.

Особенности и преимущества

  • EtherNet/IP™- or Modbus®-based PLCs/PACs can use message instructions to read diagnostic information from the radios, helping to reduce down time when troubleshooting wireless network problems.
  • 802.11i, WPA-2 Personal/Enterprise using 128-bit AES encryption ensures secure networking
  • RADIUS security ensures secure networking with advanced authentication and encryption
  • Virtual Local Area Networks (VLAN) allow for secure network segmentation
  • Network Address Translation (NAT) lets machine builders deploy many machines without needing to change IP addresses every time.
  • Quality of Service (QoS) provides data prioritization for I/O control devices, video data, etc.
  • Ultra-Fast Roaming (under 10ms) maintains seamless, high-speed connections to one or more devices on moving equipment and machines (such as cranes, AGVs, and carriers) as they travel between Access Points
  • IGMP Snooping & Packet Filtering optimizes UDP multicast traffic for superior EtherNet/IP I/O communications
  • Supports the ability to communicate with multiple Ethernet devices when used with existing third-party wireless infrastructures
  • Supports Power over Ethernet (PoE) to reduce cabling costs
  • Disaster recovery feature allows the radio configuration to be stored on a microSD card for quick field replacement
  • Connect serial networks (Modbus, DNP 3, etc.) over 802.11 wireless networks
  • Simple local and remote configuration, monitoring, and wireless network diagnostics via IH Browser utility or SNMP

Характеристики

Radio

Frequency Band
 (Varies by country)

802.11g:
2.412 GHz to 2.462 GHz (FCC)
2.412 GHz to 2.472 GHz (ETSI)

Wireless Standards

802.11b, 802.11g, 802.11i

Transmit Power (Programmable)
 (varies by country)

Up to 24 dBm (250 mW)

Channel Data Rates (Modulation)

802.11g: (OFDM) Mbps
54, 48, 36, 24, 18, 12, 9, and 6

802.11b: (DSS) Mbps
 11, 5.5, 2, and 1 

Receiver Sensitivity (Typical)

-94 dBm @ 1 Mbps
-92 dBm @ 11 Mbps
-84 dBm @ 24 Mbps
-72 dBm @ 54 Mbps

Channel Selection

802.11g:

1 to 11 (FCC), 1 to 13 (ETSI)

Security

WPA2 Enterprise – 802.11i AES w/RADIUS

[PEAP, TTLS, TLS, EAP]

WPA2 Personal – 802.11i AES w/Passphrase

Legacy WPA TKIP, WEP support, RADIUS

Network Features

NAT, VLAN, QoS, IGMP Snooping

 

Physical

Enclosure

Extruded aluminum with DIN and panel mount

Size

14.8 x 11.8 x 3.8 cm (H x W x D)
5.82 x 4.64 x 1.48 in (H x W x D)

Shock

IEC 60068 2-27 (20 g, 3-Axis)

Vibration

IEC 60068 2-6 (5G, 10 to 150Hz)

Ethernet Ports

(1) 10/100/1000 Base-T, RJ45 connector

Serial Port

(1) DB9 female (serial tunneling & encapsulation)

Antenna Port

(1) RP-SMA connector

Weight

1.1 lbs (499g)

 

Environmental

Operating Temperature

40°C to +75°C (-40°F to +167°F)

Humidity

Up to 100% RH, with no condensation

External Power

Power over Ethernet

10 VDC to 24 VDC

802.3af Compliant

Peak Power Consumption

< 7W

Характеристики оборудования

Enclosure

Extruded aluminum with DIN and panel mount

Size

14.8 x 11.8 x 3.8 cm (H x W x D),  5.82 x 4.64 x 1.48 in (H x W x D)

Shock

IEC 60068 2-6 (20g, 3-Axis)

Vibration

IEC 60068 2-27 (5g, 10Hz to 150Hz)

Ethernet Ports

(1) 10/100/1000 Base-T, RJ45 connector

Serial Port

(1) DB9 female (serial tunneling & encapsulation)

Antenna Ports

(1) RP-SMA connector

Weight

1.1 lbs (499g)

Environmental

 

Operating Temperature

-40°C to +75°C (-40°F to +167°F)

Humidity

Up to 100% RH, with no condensation

External PowerPoE (Power over Ethernet)

10 VDC to 24 VDC 802.3af Compliant

Peak Power Consumption

< 7W

Shipped with unit:

(1) RLX2-IHG (802.11g High Power Industrial Hotspot)
(1) A2502S-OA (2 dBi omni-directional stub antenna)
(1) Industrial-class microSD card with default configuration loaded
(1) Power Connector Plug (for connection to customer's DC power source wiring)
(1) Power connector wire insertion tool

Видео

 
 

одобрения и сертификаты

ATEX Letter of Conformity 79,28 kB Последнее изменение 12.05.22
CB Safety 47,05 kB Последнее изменение 14.03.13
UL/cUL; Class 1, Div 2 340,20 kB Последнее изменение 14.09.20
Country Approval - Argentina 96,03 kB Последнее изменение 31.01.19
Country Approval - Australia 30,79 kB Последнее изменение 19.05.14
Country Approval - Brazil 233,83 kB Последнее изменение 04.12.19
Country Approval - Chile 753,37 kB Последнее изменение 17.12.14
Country Approval - China 2,46 MB Последнее изменение 01.03.19
Country Approval - India 707,11 kB Последнее изменение 02.07.19
Country Approval - Indonesia 2,80 MB Последнее изменение 31.01.19
Country Approval - Malaysia 593,23 kB Последнее изменение 17.12.14
Country Approval - Mexico 59,78 kB Последнее изменение 14.10.19
Country Approval - New Zealand 34,81 kB Последнее изменение 19.05.14
Country Approval - Singapore 48,32 kB Последнее изменение 19.02.19
Country Approval - United Arab Emirates 61,93 kB Последнее изменение 05.06.20
Declaration of Conformity (RoHS/CE) 541,33 kB Последнее изменение 18.12.20
RLX2 - Declaration of REACH Compliance 340,36 kB Последнее изменение 24.02.21