The AN-X2-AB-DHRIO is a multi-purpose gateway which comes shipped with multiple Firmware options already installed on the module, but only one Firmware can be active at any given time. Each Firmware has its own web interface, with its own tab arrangements that often does no...
Read moreYes, the AN-X2-AB-DHRIO gateways are capable of communicating via EtherNet/IP with a ControlLogix system that is configured with redundant processors. Due to the nature of the redundancy, the AN-X itself does not care WHICH processor it is talking to, it is programmed to ta...
Read moreThe default IP Address is 169.254.42.84...
Read moreThe purpose of the mSD card is to facilitate the swapping out of a failed AN-X2 gateway with a new AN-X2 gateway without the need for configuring the new gateway.The mSD card is used to store configuration files and the firmware files for the gateway. For the gateway to fun...
Read moreIf you intend to use an AN-X2-AB-DHRIO to connect anything, including an HMI, on EtherNet/IP to something on Data Highway Plus, you will be using the DHP firmware. The HMI firmware is for use only with connecting HMIs like panel views to Remote I/O PLC and will not work in DH+ a...
Read moreThere are 2 ways to determine the current IP Address of an AN-X2 gateway. If AnxInit is installed on the PC, then AN-X2 modules will respond to the locate all query that can be found under the Utilities menu. (Note: AnxInit is not able to configure the IP Address of an AN-X2 ga...
Read more